FPV49 v3 Plans & Some Build Tips

Updated build video: http://www.youtube.com/watch?v=r7ytCO... Note: Plans 5:59 in video and in description. Scratch built FPV flying wing made out of depron and carbon rods. Incredible stable for high quality FPV footage! Please don't hesitate to make suggestions for improvements :) CG approx 25 til 26cm from the front of the plane (before cutting camera bay) For the new and updated FPV31 plane see here: Link to build video:    • FPV31 Build Video   Build threads with drawings: http://flitetest.com/articles/fpv49-b... http://fpv.no/vbulletin/showthread.ph... (see post 2) UPDATE: So I made the plane and it flies real nice    • FPV49 v3 New Prop & Motor   The maiden was a little bit interesting for me, did a lot of mistakes that I had to correct. Turns out testing a bunch of new equipment and setup on a brand spanking new plane wasn't the best of ideas:    • FPV49 v3 KFm-4 Maiden   The plane is based on the Kline--Fogleman airfoil KFm-4. For more information see: http://en.wikipedia.org/wiki/Kline%E2... & http://rcfoamfighters.com/blog/?p=496 Prop: 9 x 6 http://www.hobbyking.com/hobbyking/st... Motor: 1400KV / 88,3gram / 420W http://www.hobbyking.com/hobbyking/st... ESC:50A Battery: 3cell (11.1V) 2650mAh (25-50C) (when using GoPro) // 4000mAh 3cell without GoPro RC Receiver: 35MHz full range dual conversion (corona) Plans: http://i45.tinypic.com/2wr3i3t.png http://i48.tinypic.com/10saatl.png Music by: CMA    / epzonix