ЛЕЧИМ ГУЛ ПРИ ЕЗДЕ И СТУК КОЛЕСА. ЗАМЕНА ПОДШИПНИКА ПЕРЕДНЕЙ СТУПИЦЫ НА РЕНО ДАСТЕР | ВИДЕОЛЕКЦИЯ#2

#RenaultRepair #DusterBearing #HubBearingReplacement #RenaultDuster #VideoLecture You can purchase TORQUE products in Samara at the online store https://megalogan.ru/ or http://salytavto.ru/ as well as on federal platforms: https://www.autodoc.ru/ https://www.part-kom.ru/ and https://www.exist.ru/ The front wheel bearing part number for the Renault Duster is TORQUE DAC42800039ABS. A detailed video guide on replacing the front wheel bearing on a Renault Duster. This video will help you resolve issues such as a humming noise while driving or front wheel play. Important topics that will be discussed in this episode include: how to remove the ABS sensor, all bolt and nut tightening torques, how to properly remove the front suspension knuckle, how to press out the front hub bearing, the sizes of the bearing presses and inserters, how to remove the hub race without damaging the hub, and what to pay attention to if you have a bearing replaced at a service center. The video is also suitable for the following procedures: replacing the front suspension knuckle on a Renault Duster, replacing the ABS sensor on a Renault Duster, and replacing the front hub on a Renault Duster. The Renault Duster front ABS sensor part number is BOSH 0265008941. Video on replacing the rear wheel bearing on a Renault Duster 4x4    • ЗАМЕНА ПОДШИПНИКА ЗАДНЕЙ СТУПИЦЫ НА РЕНО А...   Important bolt and nut tightening torques when replacing the front wheel bearing on a Renault Duster: Front wheel mounting bolt: 90 Nm, Tie rod end ball joint nut: 37 Nm, Shock absorber strut to steering knuckle nut: 180 Nm, Front wheel hub nut: 280 Nm, Ball joint to front suspension arm nut: 75 Nm, Brake disc to wheel hub flange bolt: 14 Nm. Renault Duster Wheel Bearing Replacement Repair Guide: 0:00 Intro 0:45 What's in today's video 0:52 Removing the front wheel 1:30 Breaking off and unscrewing the hub nut 2:47 Soaking the splined portion of the CV joint and pulling it out of the hub 3:37 Tapping off the brake disc bolts 4:00 Unscrewing the disc bolts 4:30 Unscrewing the tie rod end nut and removing it from the knuckle 5:57 Trying to remove the ABS sensor from the knuckle 7:57 Disconnecting the ABS sensor harness 9:47 Unscrewing the brake caliper from the knuckle 11:58 Unscrewing and pulling out the ball joint from the knuckle 15:06 Removing the drive shaft from the hub 15:16 Unscrewing the knuckle mounting bolts to the shock absorber strut 16:00 Removing the knuckle with the hub, brake disc, and bearing 16:28 Removing or BREAKING the ABS sensor 18:00 Removing the brake disc 18:38 Size of the mandrel for pressing out the hub 19:16 Pressing the hub out of the bearing 20:37 Removing the hub bearing retaining ring 22:21 Preparing the OLD bearing for pressing out 23:17 Size of the mandrel for pressing out the bearing from the knuckle 23:47 Pressing the hub bearing out of the knuckle 24:14 Mandrel for final removal of the bearing from the knuckle 24:44 Removing the hub bearing from the knuckle 25:05 Cleaning and preparing all working surfaces of the knuckle 26:30 Preparing the surface ABS sensor installation 27:03 Important point before pressing in a new bearing 27:29 Selecting a bearing - which one do we use 27:39 Review of the hub bearing for Renault Duster TORQUE DAC42800039ABS 28:10 Where can I buy this bearing 28:25 Pressing a new bearing into the knuckle 30:19 Installing the retaining ring 31:13 Removing the bearing race from the hub and preparing it for pressing 31:53 How we removed the bearing race 33:07 Pressing the hub onto the bearing in the knuckle 34:00 Preparing work areas on the suspension for knuckle installation 34:47 About the new ABS sensor 34:58 Assembling everything in reverse Sequences ------------------------------------------------------------------------------------------------------ Instagram - useful repair and parts tips every day:   / remontrenault   Join the Renault Repair team:    / @zenicom   Decoding the VIN code and equipment of your Renault: http://www.donationalerts.ru/r/petrth...