Ricoh GR (II) Disassembly

This Video is part of "Howto Avoid & Fix Common Ricoh GR Problems" https://michaelkowalczyk.eu/library/h... Disassembly of a defective Ricoh GR Camera. The camera stopped working after developing the Closed Shutter after Power On Problem. In the video I discuss and show the "Shutter Flex Cable". A broken cable could potentially be the cause for GR & GR II developing the Closed Shutter after Power On issue. 00:00 Introduction and problems with the camera 00:36 Unscrewing the body from the bottom, sides and the top (flash mount) 01:51 Top and back plate 02:55 Back plate flex cable 03:40 Screen 05:00 Microphone cable 06:31 Sensor module (view a more detailed disassembly instruction on https://jamiecollinson.com/blog/disas...) 08:09 Sensor rubber barrier 09:01 Lens module 10:19 Lens barrels and hot mirror (blue glass) 12:00 Hot mirror (blue glass) 13:38 Shutter Flex Cable 18:20 Lens Housing Disassembly Video (view the updated howto    • Ricoh GR (II) Lens Housing Disassembly  ) 16:57 Lens Housing Barrels & Lens 20:45 Leaf Shutter, Aperture & ND Filter // For GR III disassembly check out the photo documentation by Mausinspektor https://www.dpreview.com/forums/threa... Tools used: Thin Phillips screwdriver with magnetic tip Tweezers Non metallic tip No used but highly recommended: Anti-static wrist band (thanks Will) Replacement Cable: "Shutter Flex Cable" replacement cables can be found on Aliexpr... Make sure to buy one with pre-soldiered connectors! DISCLAIMER: This is not an official guide. Imitation is at your own risk! I am not responsible for any damage caused.