Ep. 144 FINISHING THE ST. MARK MOSAIC AND SUNFLOWER MOSAICS TWO WAYS!

Ep. 144 FINISHING THE ST. MARK MOSAIC AND SUNFLOWER MOSAICS TWO WAYS! 0:45 This week I start by laying in the sky on the left side of St. Mark. So easy since the pieces are ready to go! I am using Laticrete 254 thinset as the adhesive over mesh. This mosaic will be installed on the exterior of a church, along with three others. 2:35 Next, I move to the wing on the right, making the main spine and then adding the feathers. I've got it down to a system now and it goes pretty quickly. Dark gray, gray, white, repeat. 4:16 I prep two different wood flower cut-outs from a craft store. I use Kilz Primer/sealer to cover the edges and top. It takes several coats to cover them. 5:20 The big sunflower is my next project, and I build up the center with a piece of GoBoard I cut out with an exacto knife. A bunch of beads are going in the middle, so I show some that I select for this mosaic. I pull a few bins from my bin bin, including black, brown, dark red and some that look like seeds but are polished stones. 8:08 Crumpled aluminum foil is used to bridge the height gap. I glue it in place and then Apoxie Sculpt will go over the top. 9:17 The cabochon is placed in the center and then I waste a bunch of time doing some unnecessary nonsense step. Faceted beads are added next to the cab, and then the irridized irregular seed beads in black. TIP: TIE OFF BEADS AS YOU GO!!! 10:49 Using wheeled nippers, I cut up a bunch of glass rods. The fatter rods are cut in fourths. Then I start imbedding them in the black Apoxie Sculpt. I work as quickly as possible since the Apoxie sets up relatively quickly. 13:15 After adding a ring of beads, I add the black glass nuggets, one at a time, and then the dark red. The palette of yellows is selected. 14:35 I show how I cut large feather cuts, then cut a large inventory and fill my tray with the four different colors! 15:40 The sunflower kicks off with a yellow and brown glass that is added next to the center. Then the bright yellow is added about halfway down each petal before I call it quits! 16:44 Time to finish up St. Mark! It feels so good to check this off my list! YAY!!! Now I just have three more... 18:57 I started another sunflower, and I am almost finished! The adhesive is GE Advanced Silicone on a glass substrate from Dollar Tree. TIP: USE CLEAR SHELF PAPER TO CREATE A MOSAIC PATTERN PIECE. This method is a bit slow, but pretty accurate. 22:20 The next day, the smaller sunflower mosaic is grouted with Mapei sanded grout in black. It is a soft black. After I spread it in every interstice, I wipe off the top and give it 25 minutes on the timer to haze over before the final cleaning. Then I show it off in the bright sunlight! That's Putting It Together Ep. 144! Thanks for watching. See ya next time. Please like, share, comment, subscribe and hit that notification bell so you will know when a new video is posted! WATCH NEXT: Ep. 124 INSTALLING THE COMMUNITY MOSAIC MANDALA PROJECT, PHASE II!    • Ep. 124 INSTALLING THE COMMUNITY MOSAIC MA...   COME SAY HI: Instagram:   / mazzonimosaics   Facebook: https://www.facebook.com/profile.php?... Pinterest:   / _created   Website: https://mazzonimosaics.webs.com/ Etsy: https://www.etsy.com/shop/MazzoniMosa... MOSAIC IN PERSON CLASSES (Atlanta metro area) Spruill Center for the Arts: https://www.spruillarts.org/ The Art Place Mountain View: https://www.artplacemarietta.org/