Belt Sander Grinder DIY. I made it Using Only Simple Tools.

Hello everyone🙌. I built this belt sander using a simple power tool and junk I found in the workshop. I'm sure you can do the same, or even better! Work process: To make a drive roller without using a lathe, I took plywood and a jigsaw. The plywood is strong enough and is perfect as a drive roller. I cut the circles of the desired diameter with a jigsaw and glued them together with wood glue. For greater reliability, I pulled these circles with two long self-tapping screws. Then I fixed this workpiece on the motor shaft and using an angle grinder and a chisel, gave a round shape to my workpiece. I made the driven roller using several bearings and a bolt. I made the frame of the grinder from a sheet of iron 6 mm thick. I showed the whole process in the video, I think you will like it! FRIENDS ATTENTION! I started a new channel on YouTube. This channel is all about cooking! Mostly male food! Everything we like - more meat, and without unnecessary troubles! Please support my endeavor! Follow the link, look at a couple of recipes, I'm sure you'll like it! Thank you!    / @maninthekitchen209   #BeltSander #DIYProject #DIY