Converting a Shimano hub 130 to 135mm wheel
In this video I demonstrate how to convert a Shimano hub that has a 130mm OLN (Over lock nut dimension) to a 135mm. This enable you to use a wheel that was once built with a 130mm axel spacing to a larger 135 spacing. This same procedure can be done for 126 to 130. You would only want to do this if you already have a rear wheel, that could be used on another frame.
▶︎
Cold Setting A Bike Frame (126mm to 130mm Hub Spacing)
▶︎
Swapping Axles in a Trek Hybrid - 130mm - 135mm hub spacing conversion with a wheel dish and true
▶︎
Bicycle hubs - A complete re-design.
▶︎
How to convert a 7 speed hub cassette to 8, 9 or 10 speed
▶︎
Shimano vs SRAM: The Truth Nobody in Cycling Wants to Admit
▶︎
Hub sealed bearings-Extract &Press no special tools
▶︎
Are You STILL Lubricating Your Chain Incorrectly?
▶︎
How to replace bike freehub cartridge bearings. Fixing a bicycle wheel. №2
▶︎
Fit a 142mm Hub in 135mm Dropouts!
▶︎
Opening a sealed Shimano Bottom bracket catridge service
▶︎
All You Need To Know About Freehubs, Freewheels, And Cassettes
▶︎
WANT SUPER FAST CUP AND CONE HUBS IN UNDER 10 MINUTES - MY BEST ADVICE
▶︎
Why Would I Like To Have Through Axles On ALL Of My Bikes? Quick Release vs Through Axle.
▶︎
My bike needs repair. How to replace a bicycle hub. Tutorial
▶︎
Please Step Away From The Bike...
▶︎
How To Service Cup & Cone Wheel Bearings | Maintenance Monday
▶︎
I Modified My Bicycle To Run Lightning Fast. Everyone Was Amazed!
▶︎
Noise from bicycle freewheel. How to repair bike freehub
▶︎
Cartridge Hub Bearing Replacement | Step-by-Step Wheel Bearing Change
▶︎