How To Clear A Flashforge Ad5x Nozzle And Make Things Worse.

Here’s a fix for nozzle clogs on the AD5X. If you’ve ever had filament snap off in the extruder or just stop feeding for no reason, this might save you from tearing your hair out. Just a screwdriver, a bit of patience, and some low-level panic. Took the front off, yanked the C-clip, shoved the filament through the wrong way — you know, the usual. Definitely not the official method, but it got the job done without setting anything on fire. So that’s a win. ➕ Tools: Flashforge AD5X Filament with trust issues T8 hex, and a small flathead A growing sense of “why do I do this?” 💬 Let me know if yours unclogged more gracefully, or if you’ve just given up and bought a new printer. #AD5X #3DPrinting #Flashforge #FilamentClog #WhyThough 00:00 - The Clog Begins 00:15 - Filament Jammed Inside 00:35 - Trying to Pull from the IFS 01:00 - Removing the C-Clip 01:30 - Clearing the Coupler Clip 02:15 - Pushing Filament Through at 260°C 02:45 - Filament Cleanup and Pull Test 03:30 - Troubleshooting the Nozzle Blockage 04:15 - Removing Screws to Access Clog 04:45 - Clearing the Stuck Filament Piece 05:15 - Reassembling the Extruder 05:45 - Final Test and Wrap-Up