W123 HVAC Recirculation Modification (Cheap/Free Colder AC Mods Part 1)

My W123s HVAC system is just a little lacking in this hot July weather. Maybe it worked better in a more temperate climate like in Germany, but in the southern US not so much. A big reason for this is the recirculation door. From the factory you get at best 80% recirculated air. That means 20% of your is the hot, humid outside air, and removing humidity is a huge drain on AC systems. There is a simple, non-destructive way to change this to work as either 100% recirculated, or fresh air without having to have ropes, drilling holes or other methods. It can be easily undone should you decide you want factory HVAC again. Key things in video: 0:00 Introduction 0:35 Before: 61 Degree vent temperature (Idling, hot engine, parked in sun) 0:50 Why this happens 2:00 Pull climate control out 3:00 Vacuum control valves 3:44 Unplug #5 electrical connector 4:10 Remove vacuum lines from #4 and #5 4:27 Explanation of how the mod works 4:47 The actual modification (requires vacuum line and a tee fitting) 6:00 How it'll all look, Reassembly 6:30 After: 55F vent temp 7:29 But wait, theres more (videos coming about improving AC) I just used some stuff I had lying around, but here are some links to what you can use if you don't have spare vacuum line and tees about: Tees: https://amzn.to/3hEH8mj Vacuum line: https://amzn.to/3g7trMC Note: These links may be affiliate links, which earn me a small commission at no additional cost to you!