Plastcompactor HV for densification - Herbold Meckesheim

The HV plastcompactor is a compactor for the densification of regrind of low bulk density, in particular shavings, foam, fibres and film – available in three sizes. The agglomerate thus has a higher bulk density than the source material. It has good flow characteristics and can be extruded or injection-moulded without forced feeding. In mixing silos, e.g. after film washing lines, densified material gives higher amounts of material in a mixing batch, thus producing a more even mixture. The agglomerator/compactor consists of two discs equipped with kneading bars, one of which has a rotating mounting. A drive performance of between 22 and 160 kilowatts at the rotating disc generates the friction needed for the densification process. In contrast to standard batch-type agglomerators or compactors, the HV agglomerator carries out a continuous process without adding water to the product. The material is pre-shredded in a granulator and automatically fed into the compactor via a buffer silo. The agglomerate is reground in a second granulator; an air classifier sorts out dust and fine particles and returns them to run through the process again. We are your specialist partner for machines and systems for plastic recycling, and for the shredding and pulverization of clean production waste. Herbold also produces systems for wet shredding, washing, separation, drying and compaction (agglomeration) of used, contaminated and mixed plastic waste.