everything about the electric motors|| Complete winding of 200 kW 1500 rpm Siemens electric motor

Hello and good time to all friends and followers of the coil_magnet channel Today's video is about the winding of a 0-100 electric motor of 200 kW 1500 rpm SIEMENS In the first step, we must remove the faulty wires from the stator slots. Then, we carefully inspect the inside of the stator slots to make sure that nothing is left inside and we clean the stator of the electric motor completely. Now it's time to re-insulate the stator slots, which we used NUMEX paper with a thickness of 0.35mm. Then we started winding the coils of the electric motor, the size of the wires used is as follows. Next, the coils are inserted into the stator slots in order. After that, it is the turn to connect the coils to each other, which in this electric motor is connected in parallel. Finally, you can see the winding of the coils. Here we provide you with information about the winding of this electric motor. Number of coils 24. Weight of each coil 4kg. Total weight of the wire used 96kg. Size of the enameled wire used 10*1.4mm. Number of turns of each coil 5. Type of parallel winding. Number of stator slots 72. Type of insulating paper used NUMEX 0.35mm. 00:00 Removing defective wires from inside. Stator slots. 11:14 Cleaning the stator of the electric motor. 16:29 Re-insulating the stator slots. 22:44 Winding the coils. Electric Motor ‎24:04 Inserting the bobbins into the grooves of the electric motor ‎42:22 Threading the electric motor bobbins ‎47:02 Making connections between the electric motor bobbins (heading) ‎50:45 Soldering the connections ‎52:14 Insulating the electric motor connections ‎54:07 Threading the electric motor bobbins ‎I hope you enjoy watching this video and it is useful for you ‎If you like this type of video, please subscribe to our channel and support us with your likes and comments.