How To Replace OX Electric Skateboard Motor Gear - 11T to 13T Upgrade Guide

Looking to push your OX Electric Skateboard to the limit? In this video, we provide a comprehensive, step-by-step tutorial on upgrading your stock 11T(4.3) motor gear to a high-speed 13T(3.6) gear. This simple mechanical swap is the most effective way to increase your board's top speed without sacrificing the reliability of the Linnpower Gear Drive system. Follow along as we cover the technical nuances of motor alignment and proper lubrication. After replacing with the 13T motor gear, the gear ratio drops from 4.3 (11T) to 3.6, and the top speed increases from 65 km/h to approximately 70 km/h. 🛠 Tools & Parts Required: 13T Motor Gear: https://linnpower.com/products/motor-... Hex Key Set: (H3 & H4); Lithium-Based Grease; Flathead Screwdriver; ⏱ TIMESTAMPS: 0:03 | Part 1: Removing the Wheel 0:23 | Part 2: Motor Guard Mount Screws (Pro Tip: Only remove one side!) 0:39 | Part 3: Moving the Gearbox 1:09 | Part 4: Removing the Motor 1:27 | Part 5: Swapping 11T to 13T & Adjusting Motor Mount Position (Critical Step) 2:27 | Part 6: Proper Greasing & Ensuring Seal Ring Integrity 2:57 | Part 7: Replacing the Second Motor Gear & Guard Reassembly ⚠️ IMPORTANT TECHNICAL NOTES: Motor Alignment: After swapping the gear, ensure the motor mount is precisely positioned to guarantee perfect gear mesh. Sealing: Always double-check that the seal ring is seated correctly before installing the motor back to gearbox. Lubrication: Use only high-quality lithium-based grease. Do not over-grease; a thin, even coat on the gear teeth is optimal. Ride fast. Ride safe. #Linnpower #OXSkateboard #ElectricSkateboard #DIYSkate #SpeedUpgrade #GearDrive #EskateMaintenance