Commencer la domotique : Le guide ultime pour débuter #1 🏠

🩷 Support the channel by clicking here:    / @howmation   ❓ Need help? The Howmation forum is here: https://howmation.com/fr_FR/forum/ Discover the ultimate guide to getting started with home automation and transforming your house into a truly smart home 🏠💡 In this video, we'll see which are the best choices to start home automation affordably and the right way. 🛠️ HOME AUTOMATION EQUIPMENT Expect to spend at least €150 to do things properly. Around €200 with the hub. €250 if you want Z-Wave in addition to Zigbee. I've included a list of Raspberry Pis you can use, but honestly, a version 4 with 4GB is MORE than enough, even more than enough. No need to spend more money; it's overkill. Instead, invest the difference in an official power supply and case. The links below are affiliate links to various sites with which the channel may or may not have a partnership. These links allow the channel to earn a commission and thus support its operation. The Raspberry Pi (any model, a 4GB version is MORE than enough) Raspberry Pi 4 - 4GB: https://how.wf/RPI4B4Go (from Amazon, more expensive but faster: https://how.wf/RPI4B4GoAZ) Raspberry Pi 4 - 8GB: https://how.wf/RPI4B8Go (from Amazon, more expensive but faster: https://how.wf/RPI4B8GoAZ) Raspberry Pi 5 - 4GB: https://how.wf/RPI5B4Go Raspberry Pi 5 - 8GB: https://how.wf/RPI5B8Go Power supply (highly recommended!): Power supply for Raspberry Pi 4: https://how.wf/AlimRPI4 Power supply for Raspberry Pi 5: https://how.wf/AlimRPI5 Zigbee & Z-Wave dongles (one or both) Zigbee USB Key: https://how.wf/CleZigbee Z-Wave USB Key: https://how.wf/CleZwave SSD: Transcend 120GB SATA III 6Gb/s: https://how.wf/SSDRPI Case: The following cases are compatible with M.2 SATA SSDs with B-Key or B+M. If you don't choose one of the cases listed above, be aware of this! The following cases are compatible with M.2 SATA SSDs with B-Key or B+M. GeeekPi for Raspberry Pi 4 (less aesthetically pleasing, better cooling): https://how.wf/GeeekPiCase GeeekPi for Raspberry Pi 4 (if the first one is unavailable): https://how.wf/GeeekPiCase2 Argon One for Raspberry Pi 4 (+ less aesthetically pleasing, less efficient cooling): https://how.wf/ArgonOne Currently, it's difficult to find a case for version 5 that isn't sold out. (There are others, but this is the easiest to set up.) SSD Adapter (not mandatory if you buy the case, but it will greatly simplify the Home Assistant installation): SSD Adapter: https://how.wf/AdaptateurSSD (If you use a different adapter with the hardware mentioned above, be careful about compatibility: SATA SSD B+M) 🌍 SOCIAL Discord: https://discord.howmation.com/ Twitter (X): https://how.wf/X Website: https://howmation.fr 💻 MY SETUP Processor: Intel Core i9 13900K Graphics Card: NVIDIA RTX 4080 RAM: 64GB DDR5 CL32 AIO: Kraken 360 - 360mm