No More Spilling Precious Water! There Has To Be a Better Way to Fill Caravan Water Tanks!!

This is a light hearted, "tongue in cheek" look at a very simple method we used to modify our Mountain Trail LXV 6.7 caravan. We were both thoroughly "fed up" with constantly getting wet, and getting dirty looks from those waiting behind us at water fill points, as a consequence of the painfully slow and utterly inefficient mechanism for filling the water tanks on our Mountain Trail caravans . So we, well Colin actually, decided to do something about it! This short video demonstrates the problem filling our caravan water tanks with the traditional "top fill" system, and not only suggests a better solution, but shows the solution in action...and provided a "hands on" tutorial how you can make this modification yourself. The parts list required is as follows: 6 x John Guest Garden Tap Adaptor - 12mm to 3/4 Inch Female BSP 1 x John Guest Plastic Pipe Cutter Suit 12mm to 15mm 24 x John Guest 12mm Speedfit Water Pipe Black (Per Metre) 6 x John Guest Non Return Valve Push On Fitting 6 x John Guest Swivel Elbow 12mm to 1/2 inch Male BSPT Fitting 6 x John Guest Flow Bend Clip Suit 12mm Pipe Bunnings Holman 3 Way Metal Tap Outlet - Bunnings Australia Holman 12 x 20/25mm Brass BSP Tap Adaptor - Bunnings Australia Surface Gard 16mm Black Round External Rubber Chair Tips - 4 Pack - Bunnings Australia Brasshards 20 x 15mm Brass Threaded Hex Reducing Bush - Bunnings Australia check thread on tank Zenith M6 x 52 x 28mm Galvanised U-Bolt - Bunnings Australia x2 Bunnings 60 x 100 x 140mm M10 Galvanised Angle Bracket - Bunnings Australia NB: The above parts list is for TWO caravans. For a single caravan you need half of these parts