Button Back Armchair. Reproduction re-upholstery. Part 2

In part 2, the tutorial shows how to reupholster a modern, factory built, reproduction, button-back armchair. It's different from traditional upholstery, because it's constructed using hardboard and foam instead of webbing, hessian and hair. Therefore, I have reupholstered this chair without removing the foam wadding and hardboard back. This is a long video, because it covers in detail, how to re-cover the chair for beginners of re-upholstery. Please scroll forward to the parts you need if you're a more confident upholsterer. You will see how to measure for and layout the pattern pieces economically, to work out how much fabric you will need. Remember, you will need more patterned fabric than plain to pattern match on the chair. I show you how to re-cover removable wooden scrolls. How to use fibre and metal back-tack strips and cut around different leg angles and awkward corners and joints on the chair. You will learn how to button the front of the chair using traditional methods and finally, what you need to know about adding fire retardancy labels. On this chair, I am able to cut fabric for the piping, straight across the width of the fabric, but below is a link to make continuous piping on the bias, if you need longer lengths or tighter bends.    • How to Make and Join Continuous Piping   In part 1, I demonstrate how to strip down the chair step by step. See the following link.    • Reproduction re-upholstery. Button Back Ar...   Link to part 3. Box-pleated skirt added to the chair.    • Box pleat skirt. Reproduction Re-upholster...   Watching these videos will give you an idea whether you feel confident to tackle a chair like this yourself. If you find this video useful, please subscribe, like and hit the bell to see more 'how to' videos on re-upholstery and soft furnishings. Leave a comment if there is anything you would like to see regarding re-upholstery or soft furnishings. Thanks for watching and good luck with your projects.