Molde de lonchera

Hi! In this video, I'll show you how to make a lunchbox pattern. Below you'll find the measurements and materials I used. I hope you enjoy the video, and please excuse any background noise. Cheers! ☺️ CORDURA: (1/2 meter) For this, I used two 25 x 22 cm pieces of cordura fabric. One 65.5 x 16 cm piece of cordura fabric for the gusset. Two 5 x 22 cm pieces of cordura fabric (sides). One 17 x 8 cm piece of cordura fabric (top front of pocket) and one 17 x 11 cm piece (bottom front pocket). SILVER: (1/2 meter) 3 pieces of silver fabric, 25 x 22 cm, for lining the interior (front, lid, and back). 1 piece of silver fabric, 65.5 x 16 cm, for lining the gusset. 1 piece of silver fabric, 17 x 11 cm, for the inside of the pocket. 1 piece of silver fabric, 20 x 11 cm, for the pocket. THERMAL INSULATION: (1 meter) 3 pieces, 24 x 21 cm, for the lid, back, and front of the lunchbox. Cut the insulation on the front with a curve to allow for the zipper. (Please note) Always cut the thermal insulation 1 cm or 1.5 cm smaller than the fabric for sewing. 1 piece 63.5 x 15 cm for the gusset. ZIPPER: 1 meter of #5 zipper (1 strip 65 cm and another 20 cm) 3 zipper pulls BACKPACK WEBBING: Approximately 2 meters of 3 cm wide. 1 strip 1.60 meters long. 1 strip 25 cm wide. GROSS RIBBON: Approximately 3 meters. #40 BLACK THREAD (nylon) ⚠️⚠️(Note: I list the fabrics by half meters because they are not sold in smaller quantities, but there will still be some left over). #canvo #diy #lunchboxes #freepattern