VESPA Ignition VESPATRONIC Installation - Tutorial

In this tutorial video we want to explain the installation and setup of the VESPATRONIC Ignition into a VESPA scooter. The ultimate for Vespa owners who wish to use a performant and efficient scooter, bright lights during the day and night, reliable running with no moving parts. The technical features are as follows: Timing adjusts automatically, with a pre programmed curve of up to 8 degrees Nylon fan, light with good air flow for cooling. Can be used with the standard cowls High power output, 12V 90W easy starting, greatly improved performance HT coil and regulator are both efficient and compact, can easily be fixed anywhere The regulator supplies a clean current assuring stable current for long life for bulbs and electrical systems Regulator can be used for both AC and DC, battery charge out will even allow you to run a PC or mobile phone! The power of the regulator is both powerful and strong, even at low revs there is enough power to run 35W halogen bulbs, giving safe riding night or day Twin sparks on each revolution also burns the waste gasses still in the cylinder, greatly reduces pollution The easy interchangeable nature of the system and its parts makes maintenance and repair very easy, without the need for specialist charges The electrical components can be replaced with just two bolts, with no need to reset or adjust the timing. All parts are checked and tested by us. All kits supplied complete including electrical diagram securing spanner and puller. The conversion ignition as well as all necessary tools can be found in this notepad in the SIP Onlineshop: http://www.sip-scootershop.com/main/s...