LG F4X1009NWK - maximum length allergy care 60

this is the first downloaded cycle from the LG thinq app - allergy care 60°C. this cycle includes a steam phase at the start, which is maybe the best programmed steam phase i've seen, considering it's only performed at the start of a wash and not on its own. it's a similar idea to hisense but LG actually steams, where hisense just washes. the wire probe thermometer was not picking up the steam temperature correctly because it was sitting in residual water from the tub cleaning cycle filmed directly before this video. the temperature is held at ~63°C for a fair amount of time, making it good for hygiene purposes, as well as making it suitable for the intended purpose of removing allergens. i think the interms should be proper long 1200rpm interms, rather than the usual instant deceleration 1100rpm interms. although, it does technically rinse 5 times, including the second phase of the cooldown. so that does make up for the interms. but, i would rather have better interms and have one less rinse. i think it's a very good allergy care cycle and it definitely does the job. energy usage for this cycle was 2.11kWh 00:00:00 - introduction, loading, adding detergent, selecting cycle 00:03:02 - start and sense 00:03:49 - steam 00:59:21 - main wash 01:42:58 - highest temperature 63.4°C 02:25:49 - cooldown (phase 1) 02:28:12 - drain 02:30:26 - cooldown (phase 2) 02:33:49 - first intermediate spin 1100rpm 02:41:33 - first rinse 02:46:59 - second intermediate spin 1100rpm 02:54:25 - second rinse 02:59:53 - third intermediate spin 1100rpm 03:07:38 - third rinse 03:12:55 - fourth intermediate spin 1100rpm 03:21:50 - softener rinse 03:28:14 - final spin 1400rpm 03:39:59 - anti-crease 03:41:55 - end, unloading and results