How to Install a Two-Piece Toilet by American Standard for Retail

Installing a two piece toilet quick and easy. Follow these step-by-step instructions and you'll have your new American Standard toilet up and running in no time. Tools: chisel, adjustable wrench, Philips head screwdriver, painters tape/rag 0:00 Un-installing 0:48 Step 1: Shut off water supply. Then empty tank and toilet of water. 1:48 Step 2: Disconnect water line and loosen nuts and bolts on both sides, allowing you to remove the tank. 2:10 Step 3: After removing the tank, loosen nuts and bolts from the base. Then pull the base out, and plug the hole so nothing comes in or out. 2:50 Step 4: Slide and pull T-bolts out. Then use your chisel to cleanly take the old wax ring off. Installing the base- 3:30 Step 5: Insert new T-bolts and firmly press the new wax ring onto the base of the toilet. 4:26 Step 6: Take the rag out and carefully drop the base down with the T-bolts coming through the holes on each side. 5:00 Step 7: Press the base down so the wax ring seals, and hand tighten the provided nuts onto the T-bolts. Use the caps to cover the nuts and bolts. Installing the tank 5:30 Step 8: Connect the provided gasket to the tank and place the tank on top of the base. Tighten each side while alternating from each side to keep the tank balanced. 6:45 Step 9: Connect the supply line and turn on the water. Place the top of the tank on. 7:15 Step 10: Install the toilet seat and you are done! If you love the product as much as us leave a review! Subscribe to our Channel: http://www.bit.ly/AmericanStandardSub... American Standard on Facebook:   / americanstandardplumbing   American Standard on Twitter:   / amstandard   American Standard on Instagram:   / american_standard   American Standard on Pinterest:   / amstandard   Find More Great Videos from American Standard:    / americanstandard01   Check out our Luxury Bathroom Products at DXV    / dxvluxury