010: BNC COAX CONNECTOR CRIMPING (on RG-400)
How to easily crimp on a BNC connector to regular 50 Ohm coaxial cable using standard (not fancy/certified) tools if you don't have an automatic Coax Stripper or Crimper. This also is the same for TNC's or SMA connectors on this cable. Demonstrated by Mike G. from SteinAir, Inc.
▶︎
011: MOLEX & OPEN BARREL PIN CRIMPING, Video 1
▶︎
#230: How to install a BNC connector on RG-58 coax | DIY Repair
▶︎
#369: How to install a crimp-on BNC connector to RG-316, RG-174, etc. coax
▶︎
024: SAT-COAX Stripper Tool and BNC Crimp tutorial
▶︎
007: SOLDER SLEEVE & SOLDER SPLICE on Aviation Wire
▶︎
Fabricating Coax Cables for Experimental Aircraft
▶︎
Insulation Stripper HT-332 - blades adjustment
▶︎
Simple And Fast Method For Attaching PL-259 RF Connectors To RG-8, 9913, LMR-400 Size Coax
▶︎
How To Install A Crimp On PL-259 to Coax
▶︎
How to Crimp a BNC Connector & Make Your Own CCTV Cable.
▶︎
Crimping BNCs onto RG59
▶︎
Connector Training Video
▶︎
What Coax do I use? 4 Tips to choosing the RIGHT coax for Ham Radio
▶︎
RG59 Making a TNC connection
▶︎
Crimping Amphenol BNC Connector on to RG400 Coax
▶︎
How to Install BNC 90° Right Angle Coax Connector
▶︎
Ferrules 101 - Wire Terminal Basics | Ep: 9/14
![How to Crimp BNC Connector [Crimp Type]](https://i.ytimg.com/vi/7j5519SAzYU/hqdefault.jpg?sqp=-oaymwEjCNACELwBSFryq4qpAxUIARUAAAAAGAElAADIQj0AgKJDeAE=&rs=AOn4CLA_lT7ZSXGqykO8AnIyFmiaCTbJ_A)
▶︎
How to Crimp BNC Connector [Crimp Type]
▶︎
My Four Recommended Coax Cables that Should Cover 99% of CB'ers' Needs, Power Handling and Loss
▶︎