Cara Pasang Gacun Di TV Polytron Slim Dan Juga Sekalian Modif ON OF

How to install gacun on a Polytron Slim TV. First, we have to remove the T505 from the secondary. This ensures that when the TV is on or in standby mode, nothing burns out in the T505 component area. Then, remove the MOSFET from the primary. Then, connect the black Gacun wire to the ground - a 400V Elko. And the red wire to the drain/collector of the MOSFET. Then, adjust the Gacun trimpot to the lowest setting. If the voltage is low, adjust it until the voltage is at 110/115 volts. But later, to modify it to turn ON/OFF when the TV is off, the STnby will be turned OFF. This will allow the flyback to turn OFF or stop emitting. We can modify it using the KA78R08 IC. The installation position is on the T502. I opened the one leg, as shown in the video, and cut it for the T502 leg. For the schematic IC KA78R08 It's in the video, friends, you can see it later. Hopefully this is useful. Greetings from the soldering station.