I Added A Mandrel Die! - First Sizing My Alpha Brass - Good Results?
This week I got to size and test my new Alpha brass. I was curious to find out if the two lot numbers I have would give different results. Each 10 shot group was within 5 fps on my average speed, so I think they are close enough to not worry about mixing the lots! That is great for me. I will do some more testing as I go, but I think for Alpha it is not going to be a concern! Very good news. I got the Cortina mandrel die. This is my first time to use a mandrel. It does seem to give more consistent numbers. I think my tension may be a little tighter than the new brass, because using the same powder charge I got about 15-20 fps faster speeds. I am assuming that is a tighter grip on the projectile so it built a little more pressure. I may test another few at a tenth less powder. I want to have my speeds right under 3000 and I am currently right at 3000. Trying to not burn my barrel if I can help it! The new Alpha case lube is great. It is a little thicker than I was expecting and I got too much on my first few. I think that bumped my shoulders a little more than I wanted, but it all worked just fine. This is a very good product. The easiest sizing I have done so far in my reloading journey. The press moved so smoothly with very little effort! I just need to find the sweet spot of just enough lube to do the job and not over that amount to build up in the die and press my shoulder a little. More testing to come, but I think instead of spraying it, I will just put a little on my fingers and apply by hand. It is harder to get off with my rice cleaning process. I had rice stuck inside the cases. I ended up washing them with water and that did the job. This is probably better used with a wet tumbler to clean after sizing! Something to be aware of! I think this first test went well. My numbers are pretty good. I just need to drop a little on my speed and I should be where I want to be for this season! Let me know what you think!! Thank you for watching me go through this process and share what I am doing with you. I hope you have a great rest of your day and an awesome weekend!! This is a private range. All shooting is done in a safe, controlled environment with no people or dwellings within miles to be at risk. Help support my efforts: Score some of the best tasting coffee here from Coffee Brand Coffee: This link will save you 10% and help the channel. Code is: CK2A https://coffeebrandcoffee.com/?ref=dC... Direct Support: https://www.buymeacoffee.com/ChadKelly

A look at Mandrel Neck Dies

Every WW2 Submachine Gun Ranked — WORST to BEST

This is how I anneal my brass

2026 Gun Law Evaluation: Radical Changes for Sport Shooters & Hunters!

Ranking The Greatest Sniper Shots Ever (Distance is not everything)

How Brass Hardens Over Multiple Firings

We Ranked 10 Battle Tanks In UKRAINE, Worst to Best

Full length re sizing & Wilson mandrel die time

Ballistic Ballsack- The MOST ENERGETIC Slug We've Tested!

Mandrel vs Expander ball/button sizing. (Part 1 of 2)

Rice can clean your brass!!

AB MORGEN ILLEGAL? 20 Gegenstände, die das neue Waffengesetz verbietet!

Precision Rifle Load Development/ Part VII: Fired Brass Prep, Sizing, & Trimming

The authorities are getting serious! What hunters and shooters can expect in 2026...

Unbelievable Smart Worker & Hilarious Fails | Construction Compilation #7 #adamrose #smartworkers

Gun Restoration | damaged Browning Hi Power, (with test firing) #restoration

.22 LR: The most misunderstood cartridge of all time

Reloading Series: Case Sizing

Scharfe Patrone: 9mm PAK + Bleigeschoss!

