Firefly FFMN Demo after Modifying

Firefly's FFMN Modified Guitar Topics: Parts used, Cost of the parts and a demo. Part Links Below 0:00, Introduction to the guitar 0:36, List of parts used 6:46, Going over the total cost of the parts 8:23, Demo Sounds and how it holds tune 19:17 Final Thoughts and Ending Link to the 4x2 Hip Shot tuners used "https://www.amazon.com/gp/product/B00..." Link to the Musiclily 37MM Brass Block (Must remove steel shim) "https://www.amazon.com/gp/product/B09..." Link to the Musiclily HD Brass Claw "https://www.amazon.com/gp/product/B09..." Link to the Floyed Rose Turbo Arm "https://www.amazon.com/gp/product/B00..." Link to the Floyed Rose Black Spring Set "https://www.amazon.com/gp/product/B00..." Link to KAISH Stainless Steel Saddles "https://www.amazon.com/gp/product/B09..." Link to the Fender Strap Lock Buttons ( Full Kit ) "https://www.amazon.com/gp/product/B00..." Link to the Cream Volume Knob (Fits the Stock Volume Pot) "https://www.amazon.com/gp/product/B00..." Link to the Pure Tone Output Jack "https://www.amazon.com/gp/product/B07..." THIS PART WAS NOT USED... but the stock base plate is a softer steel and the Kinfe Edge will need to be cleaned more often due to the soft metal used. The part below is the Hardened Steel Base Plate. The knife edge will last 3 to 4 times longer. Link to the FR1000 Hard Steel Chrome Base Plate "https://www.amazon.com/gp/product/B07..."