Грунтование клеем поверхности минеральной ваты перед устройством базового армирующего слоя

8-903-743-27-96 8-903-724-77-28 n-dom.ru ceresit.msk.ru terraco.pro Before installing the base reinforcing layer, the mineral wool surface must be primed with glue. It is necessary to press the glue into the structure of the mineral wool so that the glue soaks the top layer, bonds the mineral wool fibers together and copes with the water repellent with which the basalt fibers are treated. Our task is to create a structurally strong and uniform crust of glue and mineral wool fiber on the surface. After the primer layer dries, we proceed to the base reinforcing layer, apply an additional layer of glue and embed the Facade fiberglass mesh into it. The structure of mineral wool is not uniform and therefore in places of heterogeneity after priming we observe a slight "bubbling". After the crust dries in these places, we sand the resulting "bubbles" and re-prime the mineral wool with glue, pressing the glue into its structure.