How to Make A Touch-Sensitive LED Smart Table? - Full DIY Process

Here is the complete DIY process of this epoxy resin touch-sensitive LED smart table. 1. Cut out hexagons on a CNC machine Download the CNC file: https://spetools.com/products/led-mod... 2. Polish the edges of the hexagons to remove the burrs 3. Pour epoxy resin into the grooves 4. Flatten the top and bottom surfaces of the board Router Sled: SpeTool Cratos https://spetools.com/collections/rout... Router Bit: SpeTool ATS coated surfacing router bit (W05002) https://spetools.com/products/spetool... 5. Cut out circle grooves for placing LED modules Router Bit: SpeTool down cut spiral router bit (W04004) https://spetools.com/products/spetool... 6. Polish the surface of the table 7. Cut off excess wood on all sides of the board 8. Get the LED modules prepared LED Modules: https://spetools.com/products/led-mod... 9. Place the LED modules into the circle grooves and connect them together 10. Fix them in place with hot glue 11. Join the LED table with the base together 12. Flush trim the 4 edges of the table Router Bit: SpeTool Ranger flush trim router bit (W07037) Speed: 10000 RPM Ranger Series: https://spetools.com/collections/rang... 13. Chamfer the edge with a round-over router bit Router Bit: SpeTool round-over router bit (W07028) https://spetools.com/collections/spet... 14. Apply a clear coat on the surface of the tabletop 15. Fix the table legs Done! For any questions about this process, feel free to leave your comment below! Updated: Things to note when making this table: https://www.instagram.com/p/C2h_OQ1NV...