How to Grease FZ6 Wheel Bearings

In this video I will be showing you how to grease the front and rear wheel bearings, and drive hub, on my 2007 Yamaha FZ6. This job requires taking off the front and rear wheels which is a good opportunity to check your brake pad wear and clean the swing arm. To grease the wheel bearings and oil seals I used Lucas Red and Tacky lubricant. The manual calls for lithium soap based grease. Front brake pad and rotor inspection video:    • Yamaha FZ6 Front Brake Pad and Rotor Inspe...   Rear brake pad and rotor inspection video:    • Yamaha FZ6 Rear Brake Pad & Rotor Inspecti...   Front and rear wheel removal video:    • Front + Rear FZ6 Wheel Removal and Install...   Torque specs: Front axel bolt torque: 52 ft-lbs Front axel pinch bolt: 17 ft-lbs (non abs spec) ABS spec is 14 ft-lbs Front caliper to fork leg bolts: 29 ft-lbs Rear axel nut: 87 ft-lbs Follow me on instagram @freeheadgasket Thanks for watching, please SMASH the LIKE and SUBSCRIBE button. Link to apparel website: https://free-head-gasket-apparel.crea... . Disclaimer: The content on this channel, Calvin MC, is intended strictly for entertainment and general information purposes. I am not a licensed mechanic or certified technician. The videos I create are based on my personal experiences and are not meant to replace professional advice, instruction, or service. Vehicle repairs and modifications involve serious risks. Improper techniques or incomplete knowledge can result in severe injury, death, property damage, or the failure of critical vehicle systems. You are solely responsible for your safety and the safety of those around you. The procedures shown in my videos may not be appropriate for your vehicle, your tools, or your level of experience. By watching or following any part of this content, you agree and acknowledge the following: You are voluntarily assuming all risks involved in working on vehicles. You will research and verify any procedure before attempting it. You will consult a qualified professional mechanic before performing any repair, modification, or maintenance that you are not fully comfortable and competent doing. You will use the appropriate safety gear and tools at all times, including jack stands, torque wrenches, eye protection, and fire extinguishers where necessary. You understand that what works for my vehicle may not work for yours—even if it appears similar. Although I make every effort to ensure the content is accurate at the time of filming, I cannot guarantee that every method, part, tool, or step is correct, complete, or safe for every situation. Omissions or errors may occur, and I disclaim any liability for damages or injury resulting from reliance on this information. Nothing in these videos should be interpreted as professional advice. If you are in doubt, or if your vehicle involves safety-critical systems such as brakes, steering, suspension, or fuel systems, do not attempt the work yourself. Seek professional assistance. Vehicle modifications and DIY repairs can void warranties, reduce reliability, or violate local laws and regulations. It is your responsibility to verify the legal and warranty implications of any work you do. By continuing to watch or use the information provided on Calvin MC, you accept full responsibility for any consequences resulting from your actions. You agree to hold harmless and indemnify this channel and its creator from any and all liability, loss, or damage. Stay safe. Know your limits. Work smart. And when in doubt, always ask a pro.