How to Replace 2020-2022 Toyota Corolla Front Bumper | Step by Step for Beginners | ReveMoto

Where to buy bumper: https://bit.ly/2020-2022-toyota-corol... Learn how to remove your 2020-2022 Toyota Corolla Front Bumper quickly and easily! Source: https://www.revemoto.com 00:00 Introduction 01:18 Tools Needed 01:48 Start from bottom of the front bumper 02:32 Removing screws from sides of bumper 04:39 Removing screws from top of bumper 06:21 Removing damaged front bumper 07:02 Removing grille & bumper components 14:48 Removing top emblem grille & clips 16:10 Installing grille & bumper parts on new front bumper 19:46 Installing front bumper onto vehicle 21:03 Possible installation hiccups & issues 22:20 Checking engine cover placement 22:57 Securing bottom of front bumper 23:55 Securing sides of bumper 25:25 Securing top of new front bumper 26:08 Buy at ReveMoto.com & thank you! TOOLS: You will need a panel clip removal tool, a plastic panel removal tool, or you can use a flat-head screwdriver instead. You will also need a 10mm socket wrench. PROCESS: The front bumper on your Toyota Corolla is mounted on top, on the bottom, and the sides. There should be 10 mounting fasteners securing the bumper cover to each fender liner/well that you must remove along with the fender liner. The screws that hold the grille in place also secure the front bumper cover at the top. Unscrew the screws at each side of the grille and remove it. Pop up the center button on the plastic fasteners with a small screwdriver. You will remove the ten screws and fasteners securing the bumper. Pull your inner fender liner aside from the wheel well to access the clips and screws behind there . Take off the engine splash panels underneath the bumper cover to get to the bottom fasteners, then remove the screws and plastic pins. Make sure all of the fasteners have been removed before you lift and pull the bumper cover off of the car. Start from the corners and pull the cover back and off the car. Here are the OEM & Parts Link part numbers associated with the 2020-2022 Toyota Corolla front bumpers you might use with this tutorial: Sedan (L/LE/XLE) -OEM: WITH: Tow Hook Hole (5211912998/52119F2941), WITHOUT: Tow Hook Hole (52119F2921) -Aftermarket: WITH: Tow Hook Hole (TO1000464), WITHOUT: Tow Hook Hole (TO1000459) Sedan (SE, XSE) -OEM: 5211912999 -Aftermarket: TO1000465 Hatchback -OEM: WITHOUT: Park Assist Sensor Holes (5211912994) -Aftermarket: WITHOUT: Park Assist Sensor Holes (TO1000446) Where to buy painted auto body parts: https://www.revemoto.com Follow Us to check out what we're up to! FB:   / revemoto   IG:   / revemoto   Twitter: https://twitter.com/revemoto?lang=en TikTok:   / revemoto   ________________________________________________________ #corolla #toyotacorolla2022 #toyotacorolla #diy #howto #installation #paintedautoparts #revemoto #frontbumper DISCLAIMER: While ReveMoto tries to make the information in this video as accurate as possible, we make no claims, promises, or guarantees about the accuracy, completeness, or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself (DIY) projects entail some risk. It is the sole responsibility of the viewer to assume this risk. ReveMoto is not responsible or liable for any loss, damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.