CSH10 Operator Orientation - Part 7 - Pulse length, Transmission Power, TX Interval, Target Lock
This is part 7 of 8 in the Furuno CSH10 Omni Sonar Operation Orientation series. This episode covers Sonar setting such as Pulse length, Transmission Power, TX Interval. It also covers operations like Target lock, and how to use Tilt Operation effectively. Time Codes 0:00 - Introduction 0:16 - Pulse Length 2:55 - Transmission Power 3:59 - TX Intervals 5:12 - Target Lock 8:23 - Changing Your Tilt & Range Links Visit our website: https://www.furunousa.com/ Facebook: / furuno Instagram: / furuno_usa
▶︎
CSH10 Operator Orientation - Part 8 - Chasing Actual Targets By Skillful Sonar Operators
▶︎
CSH10 Operator Orientation - Part 1 - Initial settings, P settings & Manually moving the hoist unit
▶︎
Raymarine Live: How to Read Your Sonar Display | Sonar Basics
▶︎
CSH10 Operator Orientation - Part 3 - Offcenter button, Event marks and Tilt operation
▶︎
Sonar AI Under the Hood, Part 1: Annotating Dual Short and Long Range
▶︎
SIDE SCAN Echolote: Warum man diese tolle Technik unbedingt braucht | Echolotzentrum.de
▶︎
Most Ridiculous Worker Mistakes Caught on Camera
▶︎
CSH10 Operator Orientation - Part 6 - Near Gain, Far Gain and AGC Near & AGC Far
▶︎
Garmin Just Leaked Their Next LiveScope Transducer
▶︎
CSH10 Operator Orientation - Part 4 - Remote controller, How to use Event and Fish marks
▶︎
People Who Messed With The Royal Guard and Regretted It!
▶︎
Overloaded Sand Ship Fails While Fighting Upstream At The Dam Gate
▶︎
CSH10 Operator Orientation - Part 5 - Settings, Noise limiter, Noise suppression & Signal level
▶︎
Furuno CH500 and CH600 Operator's Guide: Get Better Sonar Performance
▶︎
10 times better Sounder Maps FREE!? 🗺️ CMAP GENESIS - How to
▶︎
Unbelievable Smart Worker & Hilarious Fails | Construction Compilation #5 #adamrose #smartworkers
▶︎
This NEW Mercury Engine Has The Entire Boating Industry Worried
▶︎
Furuno FCV1900 Software Configuration: Installing or Refitting a Transducer
▶︎