2011 Subaru Outback Window Master Switch Replacement

NOTE! Step 3 has updated info I forgot to mention in video. Step 1: Remove two trim panel screws. 2: Remove plastic triangle at upper right, it pops out. Then, starting at upper right of trim, tug and pull trim out from door body. 3: Remove lower light plug AND THE MAIN WIRE HARNESS PLUG. The main harness plug is not the master switch plugs, it's the main plug that feeds all power to and from the door and the car. Now the trim can hang on the two door handle cables. 4: Remove the two wiring plugs from the WMS. 5. Remove two screws that hold WMS to trim. 6. Release little clips and push WMS up and out of door panel. Remove the three screws that hold it to the trim piece (2 on one end, 1 on the other). Get new WMS and reassemble in opposite order.