How to Replace Rear Brake Caliper 2007-2013 Acura MDX

Shop for New Auto Parts at 1AAuto.com https://trq.video/c-79-bB This video shows you how to a (front/rear)brake caliper on your 2007-2013 Acura MDX. A worn out or seized brake caliper can create dangerous and expensive problems: overheating, rotor and pad wear, or even total failure. TRQ brake calipers are engineered to fit your specific vehicle. This repair was done on a 2008 Acura MDX Base 3.7L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles: 2007 Acura MDX 2008 Acura MDX 2009 Acura MDX 2010 Acura MDX 2011 Acura MDX 2012 Acura MDX 2013 Acura MDX Tools you will need: • Pry Bar https://trq.video/oHy-1AXAA00020 • 19mm Wrench • 12mm Socket • 14mm Socket • 17mm Socket • 22mm Socket • Brake Caliper Hanger https://trq.video/ofI-1AXAA00439 • Pliers • Ratchet • Socket Extensions • Torque Wrench https://trq.video/oajr-1AXAA00044 • Brake Grease • Brake Parts Cleaner • Cloth Rags • Drain Pan Subscribe:    / @trq   Check out our playlist: Acura MDX 2nd Generation 2007-2013:    • Acura MDX 2nd Generation 2007-2013   📱 Download the TRQ Auto Repair App for more videos, torque specifications, and car repair information: https://trq.video/appdownloadyt ⚠ DISCLAIMER: While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. Note: As an Amazon Associate we earn from qualifying purchases.