Ducati Hyperstrada / Hypermotard 821 - Air Filter Change with Fuel Tank Removal

A not so quick video on changing out the air filter for my 2015 Ducati Hyperstrada. There's a bit of work to get down to the air box and opening it up to access the air filter. But I'm going to remove everything to do valve clearance inspections anyway. If you have any questions or comments just leave them below. Thanks! In general you will at least need to remove the following: Remove seat. Remove side fairings. NOTE: Use of 24mm open end wrench. Remove tank cover. Remove fuel pump cover and disconnect pump fuel and power. NO NEED to remove battery/ecu. I moved ECU out of the way. Remove crossmember. Remove front tank mounts. Remove tank. Should just lift out. NO NEED to remove voltage regulator. I just moved wiring around. Tools needed/used for replacing air filter: Hex: 3mm, 4mm, 5mm, 6mm (& 8mm for filter ring nut) 24mm open end wrench (to hold inner fairing nut) T20 Torx (for the 5 filter cover retaining screws) Wire cutters to clip off old zipt ties 3-4 new zip ties for reassembly 8mm Socket to remove fuel pump cover Rags for fuel drips and dirt/grease/etc Hiflo Air Filter Hfa6001 - https://www.amazon.com/Hiflo-Filter-M... How to reset the Oil Service Light Indicator here -    • Ducati Hyperstrada / Hypermotard 821 - Des...