#71 - Domino Crib Sheet - 3 Topics - Mid-Panel Joinery, Cut-to-Length Stock, Pinning Joints

http://HalfInchShy.com In this Domino crib sheet, I demonstrate two techniques for placing a joint accurately mid-panel. You'd typically do this to Domino a shelf into the side of a cabinet, but I've also used this many times to place smaller 'rail/stile' pieces mid-panel as well. One technique lets you set the top of the shelf or joining member while the other lets you center it on a line. The second topic is more a continuation of the Domizilla review I did recently since I now have the cut-to-length tenon stock that is being released with the Domino XL DF-700. Even if you don't have an XL, the 8mm and 10mm cut-to-length stock will be useful for times when you need a different custom tenon length. Personally, I've made my own longer DF-500 tenons on a couple home projects (stair refacing, suspended shelving, and installation French cleat for a built-in cabinet). Third topic, pinning joints with a 23ga pin nailer. I did a demonstration of this in a previous DF-500 demo, but it's useful enough for a re-run. This can significantly reduce your need for clamps with certain builds, but regardless that benefit, it adds strength. For disclosure, I received the Domino XL early as part of the Test Drive program, which requires testers to return the full kit on June 1, 2012 or allows the testers to purchase it at a small discount.