How to Cut Axle Splines on a SAJO Indexing Head
To cut 22 splines requires 1 full turn and 81 holes on the 99 hole ring. The math works out to be 40/22 = 1 18/22 = 1 9/11. Find a ring on the index head that is a multiple of 11 - 99 in my case. So 11 needs to be multiplied by 9 as well as 9, which equals 81. That's how you get 1 full turn plus 81 holes on the 99 hole ring. FACEBOOK: www.facebook.com/BlueSparkFab FACEBOOK: www.facebook.com/GlassGlowzMedia
▶︎
Kingpin Dana 60 for a CJ7 Part 11: Splining the axle shaft
▶︎
CUT PTO SPLINES IN 18 EASY STEPS!
▶︎
Cut any gear with just a slitting saw
▶︎
Making Spline Shafts For a GEARBOX (Internal Splines too)
▶︎
Indexing and axle splining, quick and easy, without an indexing head.
▶︎
Internal Splines (and Hexes Too)
▶︎
Axle Shaft Shorten & Respline | Check These 5 Things
▶︎
Making a Motorcycle Shifter Spline By Knurling
▶︎
simple plane indexing indexing head calculation
▶︎
Cutting axle splines made easy , set up and how to part 1
▶︎
Cutting Splines on the Horizontal Milling Machine for a Custom Axle
▶︎
How to Use a Dividing Head
▶︎
Involuter? I barely know her!
▶︎
CNC Dividing Head Conversion DIY! (Part 1) - Mounting Bracket
▶︎
Cutting a 15 tooth 30° involute spline
▶︎
MAKE A GEAR CUTTER USING A OLD PINION ⚙️
▶︎
Simple (Plain) Indexing
▶︎
Cutting 32 Splines on CV Joint Axle
▶︎
K&T Universal Milling Head Drive Shaft - Part 2 - Machining a 6 spline shaft in Delrin
▶︎