Modding my SURRON to 30KW!

In this video, I install the EBMX X9000 ebike controller and XLB-60 MOTOR on my SURRON Light Bee X and set the power level to 30KW(max ebmx app setting for my hw setup). I also install a Gritshift heavy hitter primary chain drive to handle the increased power of the new motor and then take the bike out and speed gun it for the first time after a basic setup on the controller. Keywords: surron KKE supermoto wheels modded surron kingpin allaboutkingpin ebike CHI battery BAC8000 evfreaks warp9 fox40 fox dhx2 enjoy gripper gritshift stem surron 220m rotors hope v4 pro taper Prickly Pegs Heavy Hitter Direct Chain Drive XLB-60 EBMX X9000 00:00:00 - INTRO 00:00:25 - Unboxing the EBMX XLB-60 Motor 00:01:25 - Flipping the bike upside down to install the XLB-60 motor 00:01:40 - Removing the stock surron bashguard 00:02:03 - Removing the primary cover 00:02:26 - Removing the stock surron motor 00:03:05 - Replacing the stock belt pulley with a primary chain conversion 00:03:35 - Notes about alignment 00:04:05 - Comparing the stock surron motor with the EBMX XLB-60 00:04:35 - Removing the chain 00:04:46 - Using a castle nut wrench on the SURRON to remove the 00:05:20 - Pulling out the stock surron belt drive 00:05:27 - Removing the stock belt pully and jackshaft 00:05:47 - Note about belt pully spacers 00:05:59 - Fitting the new chain drive to the jackshaft 00:06:38 - Reinstalling the jackshaft and axle back in the surron 00:07:15 - Installing the castle nut and fork axle 00:07:26 - Putting the EBMX XLB-60 into the SURRON 00:08:24 - Installing the primary O-ring chain 00:09:02 - Tensioning the primary chain and tightening down the motor bolts 00:10:00 - Removing the BAC8000 for an EBMX X9000 00:10:37 - EBMX X9000 Connections to the SURRON 00:10:56 - XLB-60 and X9000 Connecting cable 00:11:14 - EBMX X9000 Unboxing and connections 00:11:41 - Installing the X9000 on my surron 00:13:41 - Flipping the breaker and checking power on the X9000 00:14:23 - Installing the bash guard on the surron 00:14:57 - Final touches and buttoning up the wiring on the bike 00:15:09 - Reinstalling the chain 00:15:43 - Prickly Pegs Installed on the Surron 00:16:00 - Notes about primary Chain performance and lubrication 00:16:45 - First time EBMX APP configuration for X9000 and XLB-60 00:19:08 - Testing the XLB-60 and EBMX X9000 on the surron 00:19:25 - More EBMX APP tuning for power and current 00:20:25 - 70 mph+ speed runs on first time out 00:20:45 - OUTRO Gear featured in the video. EBMX XLB-60 Motor: https://gritshift.com/products/ebmx-x... EBMX X9000 Ebike Controller: https://gritshift.com/products/ebmx-s... EBMX 3.5in Display: https://gritshift.com/products/ebmx-x... CHI GLADIATOR Pulsar 400+A Discharge 72V battery: https://chibatterysystems.com/collect... Prickly Peg mounting plates: https://www.pricklymotorsports.com/co... Prickly Footpegs: https://www.pricklymotorsports.com/co... If you enjoyed this video or other content we have been posting on the channel, consider dropping a LIKE on it and let me know in the comments what you thought about it. SUBSCRIBE to my channel and hit the NOTIFICATIONS button, so you won't miss future videos. -------------------- INSTAGRAM and FB:   / overclockingpin     / vince.lucido   -------------------- KINGPINcooling WEBSITE and FB: https://kingpincooling.com/   / kingpincooling   #ebike #allaboutkingpin #surron #kingpin #ebmx