E-flite Extra 330SC 3D 1.3m Flight with NEW AS3X+ Settings (SHOWN IN VIDEO)

The more I fine tune the AS3X+ on the new E-flite Extra 330SC 3D 1.3m, the more I enjoy this airplane! Out of the box, the Extra 330SC 3D 1.3m is great for intermediate pilots wanting to get into the world of sport / 3D aerobatics. When increasing the throws to their max, the model pleases the experienced 3D pilot looking for an all around fun 3D / XA model that can easily be thrown in the back of any vehicle without needing to be disassembled! For those curious about how I increased the tail authority, I simply installed the elevator and rudder control linkages to the outermost hole on the servo arms, and the innermost hole on the control arm of the elevator. Next, updating the AR631 receiver with AS3X+ allowed me to add more throw by increasing the elevator and rudder servo travel in the transmitter. Doing these things ultimately allowed the elevator and rudder throw to be significantly increased. Don’t forget to LIKE and SUBSCRIBE! SHOP ON HORIZONHOBBY.COM WITH THIS LINK TO HELP OUT THE CHANNEL: https://bit.ly/3YXhWx1 Check out the Extra 330SC 3D 1.3m here: https://alnk.to/610HTAN 🔷Follow me on Facebook!🔷   / ethan.ater.71   ♦️Follow me on Instagram!♦️   / ethan_ater700