Lắp quạt trần F-60gds panasonic trên đà bê tông chưa móc treo và nguồn điện

Hello everyone. Today, at the beginning of the week, I had an appointment with a customer to buy a ceiling fan through my YouTube channel. So I went to his house to install a short-ti panaaonic f-60gds ceiling fan for him. The customer's house is near Ba Chieu Binh Thanh market. The customer said to install it on Sunday, but I was busy and couldn't install it, so I installed it on Monday morning. When I entered the house, I advised the customer to install it on the ceiling, but he said that in a few days, he would move the door, so he chose to install it on the concrete beam across the house. The height from the beam to the ground is 2.85m and there is no power source or hook. But I saw that there is an exposed power line running across, so I will take advantage of it and attach the power cord to the fan. And replace the old switch face with 1 to a face with 3 switches, because the customer bought an additional chandelier from us to install near the stairs. Because the ceiling is concrete, I will use an 8mm iron block to drill and nail it to the ceiling. Then I will attach the fan hanging bowl and tighten it tightly. Next, I will drill and attach the ceiling light for the customer at the staircase location. Finally, I connected the power to the fan and the LED light. I replaced the current switch with a 3-switch panel to control the fan and 2 lights. If you find the video interesting, please give me a like and subscribe to the channel. Thank you all for watching the video.