Registro da Válvula de Descarga Docol Não Fecha / Faça Você Mesmo

To replace the Docol 1.5/4" and 1.5/2" flush valve, you must first close the valve's integrated valve, then release the valve key and spring. This will give you access to the hex on the valve base cap. Once you remove the cap, you'll have access to the repair kit. Behind the repair kit, there's the seat and flush valve valve. Affiliate link to purchase Docol valve repair kits: https://mercadolivre.com/sec/2TBGFgr When the Docol flush valve valve won't close, either the valve key or the valve itself is faulty, replacing the part can resolve the issue. However, there may be some debris inside the flush valve base, interfering with the seal and causing the valve to pop open, causing a leak inside the toilet. The Docol flush valve valve is also very important for regulating the water pressure of the flush valve. If the water flow from the valve is too weak, you have to open the valve more, this is the case of low pressure. If the water flow from the valve is too strong, you have to close the valve a little until you reach a better flow to prevent water from spilling out of the toilet. #diy #doityourself #homeimprovement #construction #docol #valve #tips #plumbing #rent-a-husband Facebook: @MarceloMartinezcasablancarevestimentos Instagram: @marcelomartinezcasablancarevestimentos Share the video link:    • Registro da Válvula de Descarga Docol Não ...   Docol Flush Valve Valve Not Closing / Do It Yourself Docol Flush Valve Valve Not Closing / Do It Yourself Docol Flush Valve Valve Not Closing / Do It Yourself