Invt solar inverter oc1 fault setting // vfd oc1 fault setting // motor nahi

Invt solar inverter oc1 fault setting // vfd oc1 fault setting // motor nahi Learn the setting to increase the tube well pressure on the inverter in the winter season Friends, the winter has come, the solar system has been affected in many ways, now we are not getting the energy we used to get in the summer. 1 As the winter has come, the days have become shorter and the sun travels in a little corner, due to this, some percent of the solar has been affected. 2 The weather is not clear, sometimes it is very polluted, sometimes there is slight fog, so it is not good for solar, due to this, some percent of the solar has been affected. 3 Due to the weather not being clear, the solar gets dirty quickly, due to this, some percent are affected. Total, it can be estimated that 30 to 40 percent of the solar has been affected in the winter season, due to which there is a shortage of water and production is not being done properly. Solution If we talk about the inverter settings, then it may possibly face a few faults 1 ov3 ⚡ 2 ov1 💡 3 frequency up down ⬆️⬇️ 4 stopping problem 🛑 To fix fault number 1 i.e. ov3, increase the setting of PE07 by 100 volts For fault number 2, also increase PE07 by 100 volts For fault number 3, increase the setting of pb04 by 10 percent For fault number 4, set pb07 to 150 In this way, you can set your inverter for possible problems yourself Note: If there is no problem with the inverter, then do not tamper with the settings at all, as this may worsen the performance of the inverter. For more details, stay connected with us and be sure to follow the page Admin Gul Jan Baloch Karachi 03093281904 #guljanbugti #inverter #vfd