Wymiana modułu drzwi w Audi A6 C7 z OBDeleven

The window in my #Audi A6 C7 (4G) won't close, only bounces a few centimeters – the module turned out to be the culprit. A guide on how to back up the coding, disassemble the door panel, replace the faulty module with a working one, code a new one, perform basic settings, clear errors, and run output tests. ℹ️ I used #OBDeleven for #coding and clearing errors, but VCDS, VCP, ODIS, CarScanner, or any other diagnostic computer that can handle VAGi will also work. ⚠️ The door module part number (including the letter at the end) must match the previous one to avoid non-functioning features such as ambient lighting and soft close. 🛒 Buy OBDeleven and a PRO license: http://mr-fix.info/redirect/obdeleven 🎟️ 10% discount with code: MRFIX10 🛒 Upholstery removal kit: http://ali4cars.com/s/?p=interior-rem... 🛒 Pry tool only: http://ali4cars.com/s/?p=clip-removal... 📺    / mrfixpl   🔗   / lonacznik   ☕️ https://buycoffee.to/mrfix 0:00 Audi S6 C7 - window won't close, only jumps 0:30 parts and tools: module, Torx T25, computer, spoons... 1:45 reading errors with OBDeleven 2:45 other possible faults: window motor, harness, harness connector 3:15 copy of coding (long coding backup) with OBDeleven 4:55 removing door trims 6:00 door panel mounting screws 6:50 latches and sliders 9:20 careful! Be careful with the wiring harnesses 9:45 Door module, part number, disconnecting the wiring harnesses 11:00 Dismantling the door module 12:10 Replacing the module with a new one 13:00 Locking mechanism 14:00 Putting the door panel back in place 14:45 It's worth checking: are all the clips intact? 15:45 Latches, screws, decorative elements, cover 18:00 OBDeleven and initial error clearing 18:30 Incorrectly coded module and crazy rear windows 19:10 Coding the module via OBDeleven and window test 20:50 Basic settings of the window motor 21:50 Central locking, blind spot, and locking force tests 23:20 Output test of mirrors, locks, and lighting