High Pressure Oil Pump Replacement - 2002 Ford F-250 7.3L Powerstroke

Watch for helpful tips on replacing the High Pressure Oil Pump on your F-250 with a 7.3L Powerstroke engine Level of difficulty: Expert Approximate time: 4 Hours Tools needed: 3/8" FT LB Torque Wrench and Breaker Bar. High Pressure Oil Line Removal Tool. Additional tools: 3/8" 10mm,12mm,15mm socket and 3/8" Ratchet. 1/2" 24mm and 18mm Socket. 15mm and 17mm wrench. Phillips head and flat head screwdriver. 3" and 6" 3/8" extension. Pliers. 1/4" 8mm, 10mm socket and 1/4" Ratchet. 3" and 6" 1/4" extension. Oil Filter Wrench. Installation Notes: 96 FT LB Torque on Front Bolt connecting oil pump to gear. Vehicle used: 2002 FORD F-250 7.3L POWERSTROKE To learn more, visit http://www.GPSBrand.com Motorist: If this job is beyond your skill level, visit your automotive service professional.This video is for general information purposes only. The provider makes no representations or warranties as to the information contained in this video or its usage, completeness, quality or accuracy. Any use of such information is at the user's sole risk, and in no event shall the provider be liable for any consequential, incidental, special, punitive or direct or indirect damages arising from such use.