Torno: operaciones principales en el torno | 4/5 | UPV

Title: Lathe: Main Operations on the Lathe Description: This first video dedicated to lathe operations covers the first eight: 1. Turning 2. Facing 3. Edge Trimming 4. Taper Turning 5. Spot Machining 6. Drilling 7. Boring 8. Grooving. Peydró Rasero, MÁ.; Parres García, FJ.; Juárez Varón, D.; Crespo Amorós, JE. (2022). Lathe: Main Operations on the Lathe. https://riunet.upv.es/handle/10251/18... DER Automatic Description: This video demonstrates the machining process on a lathe, highlighting the different operations and tools used. It begins with the fifth operation, spot machining, using a specialized tool to create points on the workpiece. Next, drilling is performed using a cylindrical drill bit to make holes in the workpiece. The seventh operation, boring, is then shown, using circular woodworking tools to perform operations such as internal turning and facing. The eighth operation is grooving, which is used to create fine and precise grooves in the workpiece. The importance of selecting the appropriate tools and cutting conditions for each operation is emphasized, as well as the need for manual feed in certain delicate operations. At the end of the video, it is summarized that the viewer will be able to select the most suitable tools for each operation and perform the most important operations on a lathe. Author: Miguel Ángel Peydró Rasero Course: This video is 4/5 of the Lathe Operation course.    • Manejo de torno   Polytechnic University of Valencia (UPV): https://www.upv.es More videos at:    / valenciaupv   Access our MOOCs: https://upvx.es #Lathe #Cycling #Facing #EdgeTrimming #TaperMachining #SpotMachining #Drilling #Boring #Grooving #3310 - Industrial Technology