В распредкоробках опрессовкой соединяю кабельные линии

Connecting cable lines in a junction box using crimping. I will show step by step and tell. I will show manual and hydraulic crimping pliers. We insulate with heat shrink with an adhesive backing. I will show how I shrink the heat shrink with a hair dryer and how it is glued. GML sleeves https://www.etm.ru/cat/nn/9716538 - size 6 https://www.etm.ru/cat/nn/9716544 - size 10 Adhesive heat shrink https://www.etm.ru/cat/nn/6138449 - for sleeves 6 https://www.etm.ru/cat/nn/1423862 for sleeves 10 and 16 For residents of Saratov and Engels, electrical installation in apartments and houses. For residents of Russia, electrical panel projects and their assembly, phone 8-927-128-64-47 You can contact by e-mail [email protected] In telegram https://t.me/zimin230volt You can make feasible donations for the development of the channel. Donations can be made by following this link https://www.donationalerts.com/r/zimi... Alternative option: Sberbank card linked to phone number 89271286447 The composition "Readers! Do You Read" belongs to the artist Chris Zabriskie. License: Creative Commons Attribution (https://creativecommons.org/licenses/.... Original version: http://chriszabriskie.com/reappear/. Artist: http://chriszabriskie.com/ #doityourselfelectrician #crimping #electricianathome #gml #gmlp ***** Timecodes: 00:00 About connecting a copper cable using crimping 00:40 What do you need for the connection? 01:38 Wires and sleeves. Finishing the sleeve 02:15 Crimping pliers 02:42 Showing crimping 03:26 Sleeve deformation 03:36 How many times to press? 05:20 What happened after pressing 05:35 Trimming and insulating 06:24 Shrinking the heat shrink with a hair dryer 06:59 View of the connection after insulation 07:37 Crimping from the first person