Kupplung und Kettenrad austauschen bei einer Stihl Motorsäge

Replacing the clutch and sprocket using a Stihl MS260 chainsaw as an example. The clutch should be replaced if, for example, the brake shoes (the shoes no longer engage properly with the bell housing) or the clutch springs (cause constant contact with the clutch bell housing = bell housing/chain unintentionally runs at idle) are worn/worn out. Torque values ​​for clutches: M8x1 = 32 Nm M10x1 = 44 Nm M12x1 = 50 Nm The sprocket should be replaced if the wear marks on the pinion are 0.5 mm or more. The sprocket can also be replaced if a different pitch is required. If you need spare parts to repair or replace a Stihl clutch or sprocket, you can find them in our online shop: http://shop.saegenspezi.de http://www.saegenspezi.de http://shop.saegenspezi.de   / saegenspezi   The repair shown in the video is also applicable to the following machines: Stihl AV 017 018 019T 020 020T 021 023 025 029 039 020 024 026 028 034 036 038 040 041 044 046 045 050 051 075 076 056 064 066 084 088 and MS 290 390 310 170 180 190 T 191 192 T 200 T 210 230 250 341 361 240 260 340 360 380 440 441 460 640 650 660 880 231 241 251 261 271 270 280 291 311 391 171 181 211 You can order suitable spare parts, accessories, and saw chains for your chainsaw in the Sägenspezi shop. All information in and about the video is without guarantee.