How to seal Metal Screws from leaking - Turbo Poly Seal

Metal Roof Screws are causing leaks due to the neoprene washer that dries up over time. This is an easy method to repair screw leaks on a metal roof This is my son's YouTube channel. An absolute roofing professional: @allroofusa6762 Watch this video to see how I repaired these leaks:    • How to Repair Rusted Holes in a Leaking Me...   More videos on Metal Roof Leak Repairs:    • Metal Roof Edge Repair - Stop the Rust   Metal Roof Seam Repair:    • Repair Metal Roof Leaks | 3 methods shown ...   ------------------------------------------------------------------------------------------------------------------------------------------------------------- How to seal Metal Roof Screws from leaking. A metal roof that has screws that are exposed on the outside will need maintenance after 10 - 15 years. The neoprene washer between the screw head and the metal panel shrinks over time, making the screw loose. Tightening the screw might sometimes work, but it could strip loose. We use Turbo Poly Seal to seal around the screws. This method offers a solution that is easy to apply and will stop leaks. 3 Steps on Sealing Metal Screws: 1. If necessary, use a handheld angle grinder with a wire brush wheel and clean around the screw head 2. Use a brush and dab Turbo Poly Seal over the screw to cover it. 3. After curing for 24 hours, use Silver Coat protection and paint it over the Turbo poly Seal to protect it from Ultraviolet degradation Turbo PolyvSeal can be bought at https://bergstromm.com/ FTC Affiliate Disclaimer - I get commissions for purchases made through links in this post. Chapters: 0:00 Metal Screws Sealed 02:30 Replacing lose screws with bigger ones 04:00 Seal all screws with Turbo Poly Seal #metalscrews #roofleak #metalroofleak #roofseal