Sony XM6 / WH‑1000XM6 Charger Port Replacement – Complete DIY Repair Guide

Send your device in for expert repair: 👉 https://www.joesge.com/pages/repair-s... 🧰 Tools used in this video Philips 1.5 mm Screwdriver: 👉 https://www.joesge.com/products/beats... 1.5 mm Flat‑Head Screwdriver: 👉 https://www.joesge.com/products/flat-... Plastic Spudger: 👉 https://www.joesge.com/products/nylon... PrecisionTweezers: 👉 https://www.joesge.com/collections/re... Strong Metal Pry Tool (wide): 👉 https://www.joesge.com/products/stron... 🔧 Quick steps to replace the charger port on Sony WH-1000XM6 headphones: 1️⃣ Power off → pry off the right‑side ear pad. 2️⃣ Unscrew the visible Phillips screws (1.5 mm) and remove the rubber tab with the flat‑head. 3️⃣ Detach the microphone assembly (gasket + speaker driver) using the spudger and tweezers. 4️⃣ Pull the charger‑port ribbon from the power board, then unscrew the port itself. 5️⃣ Place the new charger port, re‑insert its ribbon (no black line visible), and secure it with the screw. 6️⃣ Tuck the ribbon back in with the spudger, reconnect the microphone ribbon, and re‑install the speaker driver. 7️⃣ Snap the ear pad back on, ensuring the tabs line up, and verify all screws are tightened. ✅ Charger port replaced – headphones are ready to charge! 🥷 Calling All Repair Ninjas! Members enjoy: 💎 1 custom repair video per month 💎 Priority upload placement 💎 Optional shout‑out at the start of the video 🎥 Join the Repair Dojo: https://bit.ly/3rMJJkW 🤝 Follow Us for More Repair Wisdom 📸 Instagram:   / joesge   📘 Facebook:   / joesge   💬 Questions? Hit Us Up 🌐 www.JoesGE.com 📩 [email protected] 📱 360‑362‑1722