АКПП AL4 / DP0 Установка блока клапанов Часть5

Installing the AL4/DP0 Automatic Transmission Valve Block. This video continues a series on repair and maintenance of the PSA AL4 Automatic Transmission. -Video: Valve Block Removal. Here:    • АКПП AL4 / DP0 Снятие блока клапанов (гидр...   -Video: Valve Block Disassembly. Here:    • Гидроблок. Блок клапанов АКПП AL4/DP0   Like overhauling and cleaning the valve block, this operation requires increased attention to the cleanliness of the components being installed, the surrounding area, and the tools. Avoid allowing any contaminants, especially hard ones (sand, soil, wood shavings, abrasives), to enter the interior of the transmission. When using rags, ensure that no rag fragments, threads, or lint remain in the components being assembled. From the mechanic's manual: Valve Body Mounting Center the valve body using bolts (11) and (12) Pre-tightening (in no particular order) 0.9 Loosen Final tightening (in the order shown) 0.75 You may need the following parts: Renault 77 00 102 182 gaskets - 2 pcs Citroen/Peugeot 220940 valve body cover gasket (optional if removing for the first time) Valve Body Cover Fastening Screw 2210 53 (DIAM 6X100-16) Block to Gearbox Housing Fastening Screw 2103 19 (DIAM 6X100-38) Al4 Automatic Transmission Switch (Selection) Adjustment can be found here http://peugeot-club.net/forum/topic/1... Tie rod adjustment, discussion here http://www.oktja.ru/forum/topic/10361...