CHARGER CHALLENGER 300 CLUNK,CLUNK front suspension rebuild, lower control arms x4 tie rods FIXED!!!

GOT THE CLUNK? CHECK THIS FIRST    • CHARGER CHALLENGER 300 CLUNK CHECK THESE F...   SWAY BAR BUSHING ARE OFTEN THE FIRST THING TO WEAR OUT AND MAKE NOISE. AND THEY ONLY COST 10$ in this episode we fix THE CLUNK!!! we troubleshoot the front suspension and replace all four lower control arms, inner and outer tie-rods, lower ball joints and sway bar end links. all without taking the brakes or spindles off the car... then you dont have to bleed the brakes and the abs hydraulic module after. which would run you another $300 or a more expensive scan tool i dont own... 2013 dodge charger should be similar from 2005- 2020 MAKE SURE YOU TORQUE THE INNER CARRIAGE BOLTS TO A MINIMUM OF 150 FT POUNDS. YOU MUST USE A BREAKER BAR AND A TORQUE WRENCH TO ACHIVE THIS. TURNING UP THE IMPACT IS NOT GOOD ENOUGH. keep in mind there could be multiple different reasons a front suspension could be clunking or making noise. this is just what i found on 2 different chargers and thought there could be somthing to it. hope this helps thanks for watching ... subscribe!!! THIS IS NOT A HOW TO. JORDAN AND J&RS GARAGE DOES NOT ASSUME ANY RESPONSIBILITY OR LIABILITY FOR DAMAGES OR INJURY CAUSED TO OR RESULTING FROM INFORMATION IN THIS VIDEO . WORK ON YOUR CAR AT YOUR OWN RISK...ALWAYS WEAR PROPER PPE ...AND PLAY SAFE OUT THERE