Enforcer™ Pumper – Williston, ND

Williston Fire Department is showing off their #Enforcer #Pumper. The unit is equipped with an extended bumper with 2.5” plumbing and a traditional bell. To help keep the responding crew safe, the cab is equipped with side and frontal air bags. Lighting controls on both the officer and driver side makes it easily accessible to have control over scene lighting. Rear-facing seating allows for efficient crew deployment, and a compartment directly outside of the cab provides convenient access to New York hooks and COC tanks. Vertical valves on the pump panel allow for smooth manual adjustments, and 0-400 gauges provide more precise readings. The driver’s compartment includes a toolbox for extra fittings and storage shelves for the driver’s gear. Compartments are lit with white lighting for daytime use and red lighting for nighttime calls. The department opted for side-mounted ladders instead of a ladder tunnel, allowing for quicker and easier deployment. A power inverter provides multiple power outlets for onboard charging. Chassis: 70” cab Seating Capacity: 4 Overall Height: 10’ Overall Length: 33’ 0.75” Front Suspension: #TAK4 Independent Front Suspension, 19,500 lb Rear Suspension: Spring 27,000 lb Engine: Cummins X12, 525 hp, 1695 lb-ft Pump: Waterous, 2,000 gpm Tank: 750-gallon GVW: 46,500 lbs Job Number: 39796 Dealership: MacQueen Chapters: 0:18 - Front Bumper 0:31 - Driver’s Seat 1:04 – Crew Cab 1:14 – Crew Compartment 1:35 – Pump Panel 2:35 – Pump Panel Dead Lay 2:56 – Manual Deck Gun 3:26 – Drivers Compartment 4:13 – SCBA Compartments 4:39 – Driver’s Side Compartmentation 5:35 – Rear Compartmentation 7:01 – Side-Mounted Ladders 7:52 – Officers Side Compartmentation 8:04 – Power Inverter 8:20 – Officer’s Side Pump Panel 8:42 – Crew Compartment 8:54 – Med Cabinet 9:12 – Officers Seat 9:33 – Exterior Lighting