Lee Pro 1000 Case Slider Problem and Shells Sticking in Expander Die
I was having problems with cases being kicked out of case slider and jamming the press. Also cases were getting stuck in the expanding die. Here is how I solved both problems.
▶︎
For First Time Lee Pro 1000 Users
▶︎
Lee Pro 1000 press modifications Part 1
▶︎
This Cheap Plastic Lee APP Thingy Is A Lot Easier To Use Than The Internet Leads You To Believe
▶︎
lee press pro 1000 last modification ITA
▶︎
Secret Fix For The Lee Safety Prime! No More Primers On The Floor!
▶︎
Lee inline Bullet feed die
▶︎
Shell Gate to Stabilize Shell Pusher on the Lee Pro 1000
▶︎
Lee Case Feeder on a Dillon XL650 Press
▶︎
Lee Pro 1000 Case Ejector
▶︎
Lee Ultimate Turret Press parts updates and tips
▶︎
First Use - Lee Auto Drum Powder Measure
▶︎
Lee Pro 1000 Tips for problems
▶︎
Pistol Expander Dies: Overview, Comparison, Setup
▶︎
"Quicker" Cleaning Procedure for the Lee Pro 1000 Press - Part 2 of 4 - Disassembly and Cleaning
▶︎
Lee Auto Breech Lock Pro - Bullet Feeder, Problems and Fixes
▶︎
Build your own brass case annealer from scrap parts.
▶︎
Lee Pro 1000 9mm case stuck at the 1st stage Deprime/Resize
▶︎
Lee Pro 1000 progressive press
▶︎
HOW TO MAKE A PRIMER PUSHER AND LOW PRIMER ALARM FOR THE LEE PRO 1000
▶︎