How to remove the rear wheel of a Triumph Street Triple motorcycle

This video goes through the steps on how to remove the rear wheel of a Triumph Street Triple, but is applicable to most motorcycles. I am working on a 2019 Triumph Street Triple 765 R, but it works the same / very similar for the RS models, the 675 models, and even the newer 2021 street triples. In fact, most bikes with double-sided swing-arms (Yamaha R6, Honda CBR, KTM, etc) works the same way. Loosen a nut, pull out the axle, get the brake and chain out of the way, and pull out the wheel. There will be some tools and torque spec differences (please check the maintenance manual), but as long as you keep track of where all the parts goes, this video should get you through any double-sided swing-arm rear wheel removal. Things I've learned along the process: 1. Remove the plastic insert in the spindle before hammer time or use the locknut as a surface for hammering. 2. Take out the LH chain adjuster block so the spindle is loose so it can come out easier. 3. Don't use a torque wrench as a breaker bar. 4. Remove the wheel spacers on either sides before you bring it to the shop in case it gets lost. 5. Usually the process is easier if you loosen the chain adjuster bolts first Replacement part numbers (hopefully you won't need this): T2010226 - Left-hand chain adjuster block T3555035 - 19 X 34 X 3 Washer T3350118 - M18 Locknut T2010338 - Right-hand chain adjuster block T2012048 - Top hat spacer T3450092 - Plastic insert (left side of spindle) T3450063 - Bung (right side of spindle) Chapters: 0:00 Introduction 0:32 Undoing the lock nut 1:30 Removing the spindle 2:34 Removing the wheel 4:14 Don't lose the wheel spacers! 4:42 All the loose parts in order Camera: DJI OSMO Action 4K Motorcycle: 2019 Triumph Street Triple 765 R Instagram:   / life.and.jeff