How to jump start the car using a battery jumper | Bing Thok Paise

To jump-start a car with a portable battery jump starter, you must ensure the jump starter is powered off, connect the red clamp to the positive terminal, connect the black clamp to an unpainted metal ground (or negative terminal according to your device's manual), turn the pack on, and start the engine. Preparation Check the jumper's charge level: Ensure your battery pack has at least 70% to 100% capacity before starting. Turn off the vehicle: Ensure your dead car's ignition is completely off, the keys are out, and all electronics (lights, AC, radio) are turned off. .Locate the battery: Pop the hood and locate the terminals. Look for the Positive (+) terminal (usually marked by a red cap or a plus sign) and the Negative (-) terminal Connection Steps Keep the power off: Make sure the portable jump starter is switched OFF before connecting anything. Connect Red to Positive: Clamp the Red (positive) cable directly onto the positive (+) terminal of the dead car battery. Connect Black to Ground: Clamp the Black (negative) cable to a solid, unpainted metal part of the car's chassis, frame, or engine block. Safety Tip: Avoid clamping directly to the negative battery terminal to eliminate the risk of igniting any escaping battery gases with a spark. Plug into the pack: If your cables detach from the jumper box, firmly plug the cable attachment into the pack now #everyone #automobile #howtojumpstartthebatterycarusingjumpbox #fyp #viral Please do: SUBSCRIBE COMMENTS AND SHARE THANK YOU 🤲❤️